Taking care of your PPE

Who reads this publication?

Readers include decision makers and managers in the safety, health and environment arena, SHEQ practitioners and officers and various labour and non-governmental organisations. SHEQ MANAGEMENT has an ABC audited figure of 5739, the largest circulated magazine in the field Contact us and subscribe now »

Training guide banner 2016

You are here: Home FEATURES Featured Issue 1 2018 Taking care of your PPE

Taking care of your PPE

E-mail Print PDF

Taking care  of your PPEUsing worn or damaged personal protective equipment (PPE) may be a catalyst to harm. WILLIAM GEORGE speaks to suppliers about taking proper care of PPE

In the workplace, the employer is responsible for identifying and assessing potential risks. PPE is only one part of the solution. Christo Nel, director sales and marketing in Africa for Uvex, notes: “Safety managers are responsible for preventing potential risks to employees, and as a ‘last resort’ offer PPE to protect workers from any potential harm.”

PPE is intended to protect a wearer from any potentioal risks and hazards, however, if it is worn out, it may not provide effective protection.

While Section 14 of the Occupational Health and Safety Act stipulates that the employer must provide the PPE, it remains the responsibility of the user to inspect, care for and correctly use the PPE for its intended purpose.

There are routines and guidelines that should be followed in order to maintain the quality of PPE. It is also advisable to keep PPE in good shape even when it is not in use.

Taking care  of your PPENel says the best place to start would be the manuacturer’s user instructions, which are included in the packaging of the product.

He explains: “All PPE should be supplied with detailed instructions on how to maintain and care for the product. Some reputable manufacturers will offer training in this regard.

“A simple rule of thumb is to avoid using solvents or chemicals to clean PPE, and to always refer to the manufacturer’s recommendations when cleaning the product.”

Nel advises: “A visual inspection of all PPE products must be done before the wearer dons the apparel. This is to make sure that there is no damage that may affect the integrity of the product and put the user at risk of injury.

“The manufacturer’s recommendations and/or regulatory requirements on whether a product is ‘disposable’ must be adhered to by the end user. The recommended usage period (or lifespan) of the product must not be exceeded, as this may affect the integrity of the product and put the wearer at risk.”

Nel concludes: “If PPE is well looked after it should provide protection when an incident occurs.”

Last Updated ( Monday, 12 March 2018 10:05 )  
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner
Banner

hse_07_15_28267_-sheq_advert_aug_edition